Description
High performance ignition system specially developed for the 139 QMB engines.
The bgm ORIGINAL CDIs are at original equipment level in terms of quality. In addition, they are open CDIs. This means that there is norev limiter integrated in the CDI. So your engine can rev to its full potential.
The bgm ORIGINAL CDIs are subject to very strict quality control. This ensures that,:
- a constant and strong ignition spark is present over the complete speed range
- the capacitor is extremely high voltage and pulse resistant
- the primary winding is at least at OEM level and above
- the transformation between primary and secondary coil is completely trouble-free
With the bgm ORIGINAL CDIs you always have a strong spark for the optimum power output.
And your engine can finally rev to full power.
Installation is child’s play: Simply plug them in and your engine can rev freely.
NOTE:
Different wiring harnesses are used depending on the vehicle manufacturer.
Therefore it is possible that the fuse of the battery blows after installation of the new CDI.
If this is the case, the wiring harness should be changed on the vehicle side as follows:
The black/white cable is placed on the slot of the black cable.
The black cable remains free and should be well insulated.
Only suitable for scooters with AC ignition system.
Note: Whether an AC or DC CDI is installed can be determined as follows.
- Disconnect battery
- Switch on ignition
- Start with kick starter
If the scooter starts, an AC CDI is installed.
If the scooter does not start, a DC CDI is installed.
Always check compatibility with the original component before ordering.
AI-translation
Reviews
There are no reviews yet.